We should consider the amount of feed and feed of the spiral bevel gear. In order to ensure the durability of the planer, we should choose the appropriate cutting speed. The factors affecting the cutting speed are the amount of the knife. Feed amount, cutting area, turning geometry and angle, planer material, workpiece material, planer power, and fixture system rigidity and workpiece mounting method. Shengyuan Gear Factory believes that the choice of cutting speed should consider several aspects: 1. The harder the spiral bevel gear material is, the stronger the strength is. During the planing process, the cutting resistance is also large, which makes the planing difficult, so the workpiece The hardness is high and the cutting speed should be smaller. 2. When planing, the planer or the light or heavy or micro-ground always has some vibration. The higher the cutting speed, the larger the feed, the greater the vibration. The spiral bevel gear with rough surface is processed. The planer has slight vibration, which has little effect. The workpiece with high surface requirement should be prevented. It is necessary to prevent the formation of built-up edge during the planing process, because the built-up edge on the tool tip will damage the surface of the workpiece. Clean and tidy. The method of preventing the built-up edge can be obtained by changing the cutting speed and the like as described above. 3, planing thin-walled parts, easy to deform, should choose a lower cutting speed.   

     The company adheres to the quality assurance system of technological progress and technological innovation, and fully utilizes various advanced technologies and technologies, from material selection to parts manufacturing, from quality control to product testing and testing, from order processing to after-sales service, each process and every Each link, each performance, is meticulous and thoughtful, interlocking, with rapid response development service mechanism and high starting point, multi-variety, batch, professional production, and constantly meet the needs of market customers. Wenling Haoyi Gear Co., Ltd. provides rugged spiral bevel gear manufacturer _ Yongkang spiral bevel gear. In the practical application of the Haoyi gear of Wenling City, this kind of gear is the most innovative power transmission device in the gear reducer equipment. It adopts the optimized structural design, and its modular combination system incorporates the concept of spiral bevel gears. It has a small spiral bevel gear, light weight, large transmission torque, relatively stable transmission, and comparison of transmission ratios. In terms of fine performance, we can also choose the position according to the actual needs of the user. How to make the sturdy and durable spiral bevel gear, Wenling Haoyi gear brings you----the effective cleaning and longevity secret of the bevel gear.